Go Back OFN Forums > Fabrication > Offroad Fabrication

Offroad Fabrication Offroad Fabrication


Offroad Fabrication Offroad Fabrication

Reply
 
Thread Tools
  #1  
Old 01-21-2014, 12:12 AM
bronco's Avatar
bronco bronco is offline
Fabricator
 
Join Date: May 2008
Posts: 97
Weld on lock washer?

I've been looking for some weld-on lock washers? Basically a washer that has a hex cut in it so that it would hold the head of a bolt and keep it from spinning. Thanks
Reply With Quote
  #2  
Old 01-21-2014, 03:42 AM
Haku's Avatar
Haku Haku is offline
Master Fabricator
 
Join Date: Nov 2009
Posts: 264
Ruffstuff Specialties have these.... http://www.ruffstuffspecialties.com/catalog/BOLTLK.html



They are designed to have a small bolt to lock the big bolt down, but I'm sure you could weld them too. Looks like a quality rivet might work too.
Reply With Quote
  #3  
Old 01-21-2014, 02:35 PM
deaner's Avatar
deaner deaner is offline
Master Fabricator
 
Join Date: Jan 2013
Location: Northern Ohio
Posts: 436
If you don't want it to look too fancy, you could cut a small piece of key stock and lay it against the head and weld it. I've done this successfully for blind bolts and bolts that need to be adjusted a lot so you don't need a wrench on the back side.
Reply With Quote
  #4  
Old 01-21-2014, 04:02 PM
bullnerd's Avatar
bullnerd bullnerd is offline
Master Fabricator
 
Join Date: Apr 2008
Location: Jersey
Posts: 754
Like this?

http://www.minibuggy.net/forum/proje...tml#post254987

He machines them. Laser would be quicker.I dont know if someone makes them, probably.

Try A&A Manufacturing.
Reply With Quote
  #5  
Old 01-21-2014, 05:08 PM
alwaysFlOoReD's Avatar
alwaysFlOoReD alwaysFlOoReD is offline
Master Fabricator
 
Join Date: Jan 2010
Location: Red Deer,AB Canada
Posts: 708
Quote:
Originally Posted by bullnerd View Post
Like this?

http://www.minibuggy.net/forum/proje...tml#post254987

He machines them. Laser would be quicker.I dont know if someone makes them, probably.

Try A&A Manufacturing.
I couldn't find a pic of the lock nuts. I went 10 pages before and 3 after the linked page. What post # should I be looking for?
Thanks,

Richard
Reply With Quote
  #6  
Old 01-21-2014, 10:52 PM
bullnerd's Avatar
bullnerd bullnerd is offline
Master Fabricator
 
Join Date: Apr 2008
Location: Jersey
Posts: 754
Link goes right to the pic ,at least for me it does.

942
Reply With Quote
  #7  
Old 01-21-2014, 11:03 PM
Chocflip201's Avatar
Chocflip201 Chocflip201 is offline
Master Fabricator
 
Join Date: Jan 2009
Location: Pleasant Grove, Utah
Posts: 930
Quote:
Originally Posted by bullnerd View Post
Link goes right to the pic ,at least for me it does.

942
I can't see the pics either. Just empty squares.

Fwiw I'm sure there are many people on here with a plasma table who would custom cut you some out of whatever material you wish and drop them in a flat-rate box and ship them to you.

If not, PM me, my buddy has one locally, get with me on sizes you are looking for and I can draw some up as email him a .dxf file and he will cut them out.
Reply With Quote
  #8  
Old 01-22-2014, 01:39 AM
deaner's Avatar
deaner deaner is offline
Master Fabricator
 
Join Date: Jan 2013
Location: Northern Ohio
Posts: 436
Quote:
Originally Posted by alwaysFlOoReD View Post
I couldn't find a pic of the lock nuts. I went 10 pages before and 3 after the linked page. What post # should I be looking for?
Thanks,

Richard
I don't see anything either. People are always talking about things that I can't see, thought it was just me. I don't even see the empty squares.
Reply With Quote
  #9  
Old 01-22-2014, 02:39 AM
alwaysFlOoReD's Avatar
alwaysFlOoReD alwaysFlOoReD is offline
Master Fabricator
 
Join Date: Jan 2010
Location: Red Deer,AB Canada
Posts: 708
I wonder if I have to be a member to see certain pics?

Richard
Reply With Quote
  #10  
Old 01-22-2014, 07:49 AM
bullnerd's Avatar
bullnerd bullnerd is offline
Master Fabricator
 
Join Date: Apr 2008
Location: Jersey
Posts: 754
Quote:
Originally Posted by alwaysFlOoReD View Post
I wonder if I have to be a member to see certain pics?

Richard
Sorry guys, I didnt think of that.
Reply With Quote
  #11  
Old 01-22-2014, 09:48 AM
mudrgoos's Avatar
mudrgoos mudrgoos is offline
Junior Fabricator
 
Join Date: Jul 2010
Posts: 7
try stage 8 fasteners,they make locking systems for headers and ringgear bolts and things...KeepJeepin'
Reply With Quote
  #12  
Old 01-22-2014, 11:15 AM
deaner's Avatar
deaner deaner is offline
Master Fabricator
 
Join Date: Jan 2013
Location: Northern Ohio
Posts: 436
Quote:
Originally Posted by alwaysFlOoReD View Post
I wonder if I have to be a member to see certain pics?

Richard
Yea, that's it. I logged on and there it is. Sweet little fasteners!
Reply With Quote
  #13  
Old 01-23-2014, 08:26 AM
Nutz4sand's Avatar
Nutz4sand Nutz4sand is offline
Master Fabricator
 
Join Date: Sep 2006
Posts: 459
Memeber of MBN here. I have seen those sockets he makes before and for those of us who do not have a mill (cnc like he does) to make them easy one could simply snag sockets of whatever size you need (deepwells would be best) and slice them as thick as you want them and weld them in place perhaps? (after cutting the ratchet drive part off of course)
Reply With Quote
  #14  
Old 01-23-2014, 12:36 PM
deaner's Avatar
deaner deaner is offline
Master Fabricator
 
Join Date: Jan 2013
Location: Northern Ohio
Posts: 436
Bronco, have you found anything? You could also use hex hole sleeves or hex shaft couplers and slice them with a cold cut saw or lathe.
Reply With Quote
  #15  
Old 01-26-2014, 01:26 PM
bronco's Avatar
bronco bronco is offline
Fabricator
 
Join Date: May 2008
Posts: 97
Sounds like a good idea, Those tabs from ruffstuff look like they will work
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:20 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Template-Modifications by TMS
Copyright 2012, Offroad Fabrication Network