You are NOT a real fabricator when:

[fabcam]

This thread will be dedicated to those projects you find that have the worst fabrication or engineering.

I recommend that you do not post up one of your own projects. And if one of your projects pops up, do yourself a favor and don't take credit for it.


I will get this thing started:

Found this pic on a different board with the question of "how long will it last?".


You are NOT a real fabricator when you can't make 2 control arms the same length.

[fabcam]

You are NOT a real fabricator when you add the extra trailer lights to the Lincoln.

[fabcam]

You are NOT a real fabricator when you can only find 2 4x4s to hold the truck up.

[$CEEP]

you ARE NOT a real fabricator if your welds even SLIGHTY resemble these.

[fabcam]

Originally Posted by $CEEP

you ARE NOT a real fabricator if your welds even SLIGHTY resemble these.

That is the best

[$CEEP]

Originally Posted by fabcam

That is the best

ooh oohh ohh... how bout this..

you MAY BE a real fabricator if you can take a weld like this...



and turn it into this...


http://www.offroadfabnet.com/forums/...read.php?t=375

[fabcam]

Sceep, with the post I helped a little. Hope OK.

[$CEEP]

[Halogrinder]

Originally Posted by fabcam

You are NOT a real fabricator when you add the extra trailer lights to the Lincoln.

god i feel awfull..... i was toying with this idea on my cheap truck challenge


i bet it FREEZES ASS in that lincoln

[BadDog]

That first one looks like late 60s, or 70s GM 4 link arms (common on mid-fullsize cars like Chevelle, Lemans/GTO, etc.) that someone tried to make adjustable. Please god, I hope that was only for static testing geometry...

[rockcity]

Originally Posted by BadDog

That first one looks like late 60s, or 70s GM 4 link arms (common on mid-fullsize cars like Chevelle, Lemans/GTO, etc.) that someone tried to make adjustable. Please god, I hope that was only for static testing geometry...

From a Jeep TJ...

seems to be real question from some Darwin nominee:

http://cgi.govliquidation.com/auction/view?id=919066

[ScooteK]

need a truck?



...

[fabcam]

Is that cardboard or steel behind the front seats?

[ScooteK]

plywood, I saw this at an intersection in ensenada

[KeithXtreme]

You might not be a real fabricator if:

You try and compensate for small body parts by building large plywood ones for your car!

[KeithXtreme]

The hot new item this year at SEMA will be 12" exhaust to go with 40" Wheels

[KeithXtreme]

these could go either way......

[KeithXtreme]

I said measure twice and cut once you freaking moron!!!

[KeithXtreme]

bubba's new line of Car Haulers are not catching on real fast....

[KeithXtreme]

there is so much shit wrong with this, dont really know what to say....