View Single Post
  #4  
Old 11-08-2017, 06:47 PM
eatSleepWoof's Avatar
eatSleepWoof eatSleepWoof is offline
Junior Fabricator
 
Join Date: Nov 2017
Posts: 6
What about something like these options?

1. https://www.kakaindustrial.ca/produc...shears-machine
2. https://www.kakaindustrial.ca/produc...shear-and-roll

The specs for both state that they can only bend metal up to 0.04" thick, whereas I'm aiming for 0.125". Then again, their specs are likely for material that is the full 8" width, and I'd be working with 2" width max. Would these tools be able to bend thicker material if it's at smaller widths?
Reply With Quote