View Single Post
Old 10-27-2013, 12:45 PM
Graham08's Avatar
Graham08 Graham08 is offline
Master Fabricator
Join Date: May 2006
Location: Iron Station, NC
Posts: 1,800

Those pictures were taken with the LR pulled all the way in. I don't know if you could actually run it that way or not. You might get away with it because left turns would pull the sidewall away from the arm, but with a splined axle it's easy enough to put another 1/4" or 1/2" of spacer in to push the wheel out.

It's all moot anyway since the torsion arms and bars are going away...
Reply With Quote