View Single Post
  #21  
Old 12-22-2015, 10:40 AM
deranged's Avatar
deranged deranged is offline
Fabricator
 
Join Date: Apr 2010
Location: Allendale Michigan
Posts: 75
Well, sorry gents. I was really busy the past 5 months with work, and I have not updated in a while, so here we go.

So here is the assembled front suspension, showing full bump, to full droop


Here are the 2 ears to which the rear spool will be held with. The holes line up with the adjustment fork. The shaft collars clamp down onto the spool housing.







Here is the loosely assembled spool. Rotor on one side and the sprocket on the other side. The CV joints will go on the outside of the rotor and the sprocket.




And here is how tightly everything is packaged in the rear section of the car.



Now here is the mock up of the fuel cell. I will have a chain guard bolted to the bottom of the cell to protect the stainless fuel cell



Reply With Quote